× Eccentric assembled wit bearings 1 × €62.50
× Security band (Set of 4) 1 × €8.50
× Bearing 42/20/12 mm (2pz) 1 × €19.50
× clutch screws and springs Thor 200 1 × €24.00
× Oil seal viton 20/30/7 mm (Set of 2) 1 × €19.20
× upper left part of Xenit super cage 1 × €117.00
× Paraglider lines holder (2 pcs) 1 × €6.50
× Screw 5 x 45mm (pcs 10) 1 × €5.00
× Bolts M6 x 60mm TCEI (6 pcs) 1 × €6.00
× kit bolt with nut (2 pcs) 1 × €1.30
× Starter engine Thor 200 1 × €134.00
× Relay support for Moster 1 × €7.00
× Elastic bottom pin (2 pcs) 1 × €6.00
× Pipe pressure 115mm with fixing clamp Ø 10.5 mm 1 × €4.50
× Starter rope pulley for manual starter 1 × €13.00
× GASKETS FOR THOR 303 1 × €37.00
× Engine carter block, black (includes : C005a – M119 – M024) 1 × €266.00
× Fuel pipe canvas 7×13 (1mt) 1 × €8.64
× Push pin 46mm with cap (3pcs) 1 × €56.50
× Clip connection frame 1 × €3.00
× Easy removal frame for Moster 1 × €209.00
× Xenit front wheel axle + spacers 1 × €19.50
× Roll-bar vertigo 1 × €39.00
× Shock absorber axle 1 × €26.00
× “U” support for A Assist (2 pcs) 1 × €52.00
× damper plate with caliper support 1 × €45.50
× Front wheel pin 1 × €19.50
× kit velcros straps for net (2pcs) 1 × €8.00
× Reed valve petal (Set of 2) 1 × €20.00
× INSERT FOR TUBE 20X1,5 (2 PCS) 1 × €2.60
× Support base for bottom cage 1 × €0.40
× Loop for bar suspension of Luna (2 pcs) 1 × €26.00
× Elastic upper pin (2pcs) 1 × €6.00
× Shim washer 14x22mm (2pcs) 1 × €3.50
× Plastic air-box connector Ø 32mm and O-ring viton 1 × €18.50
× Copper lock nut high temperature 8 x 1.25 mm (5 pcs) 1 × €5.50
× Tank 10 lt 1 × €65.00
× Terminal shank 1 × €5.00
× O-ring viton 88,62 x 1,78 mm reduction drive atom 80 1 × €2.60
× Lock nut (4 pcs) 1 × €0.80
× complete start rope 1 × €21.50
× Seeger Ø 15 mm DIN 472 (2 pcs) 1 × €1.00
× Nut with flange + Ondulated washer 1 × €4.00
× fork axle bearing kit (2pcs) 1 × €30.40
× Complete series of gaskets and O-ring 1 × €29.00
× Plastic connection cage (1 pc) 1 × €16.90
× Reed valve gasket (2 pcs) 1 × €3.60
× Carburetor flange Factory-R 1 × €26.00
× Air-box rubber manifold with incorporated sponge Atom – Moster 2 × €31.00
× Vertigo axle 1 × €39.00
× Inox bracket for throttle cable 1 × €4.50
× Support for three way faucet 1 × €36.00
× Plastic pulley with spring and rope 1 × €75.00
× insert rear wheel pin Eco (1 pc) 1 × €65.00
× bolts + washers 1 × €0.30
× Bar protection belt 1 × €19.50
× Piping support plate with bolt 6 x 14 Tcei DIN 912 (Set of 2) 1 × €8.50
× Tundra tire 8.00-6 1 × €109.00
× damper plate (3pcs) 1 × €117.00
× Key hole tang for flywheel (2pcs) 1 × €2.40
× Disc brake caliper 1 × €42.20
× COMPLETE FLYWHEEL THOR 303 1 × €205.00
× Tazza avviamento moster plus 1 × €32.50
× attack cradle bushings (2 pcs) 1 × €6.50
× STARTER BITE PLATE WITH SCREWS THOR 303 1 × €30.00
× Loop for Luna glider (2 pcs) 1 × €20.00
× Cylinder head gasket 1 × €14.50
× Plastic air-box connector and O-ring viton 1 × €18.00
× flyweel nut Ø 12×1,25 1 × €2.50
× cooling fan Thor 200 1 × €14.00

Cart Total:€2,435.34

Shop

“cooling fan Thor 200” has been added to your cart. View cart

Spacer for Thor 200/250 engine (2 pcs)

Spacer for Thor 200/250 engine (2 pcs)

€24.70

Spacer for Thor 200/250 engine (2 pcs)

SKU: 928.210.001 Categories: STARTER GROUP, THERMIC GROUP

Description

Spacer for Thor 200/250 engine (2 pcs)

Additional Information

Weight	0.1000 kg

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Spacer for Thor 200/250 engine (2 pcs)”